NaviaTec Fiber Optics

NFO Fiberglass (FRP) remote control for pulling cables, 8mm, 150m, yellow – placed on a special stand to facilitate its unwinding. Fiber with high elasticity and resistance to bending and tearing, covered with yellow PE plastic that has a protective function and ensures good sliding properties. Blue powder-coated fiber frame and a special “eye” for fiber guidance. The stand’s design ensures functional transport, storage and use. The end of the fiber ends with a guide head Application: – Pulling cables between telecommunication manholes; Pushing cables under roads; Installations in suspended ceilings; Cleaning and unblocking pipes, culverts, sewage systems; Inserting cables into protective pipes Technical data: Dimensions: 115x45x125 cm Outer diameter (with cover): 8 mm Length: 150 m Weight (with frame): approx. 25 kg

NFO Laser light source, fault locator, power 20mW – The light source is a laser device used for quick and easy testing of fiber optic path continuity. The device is powered by two AA batteries or via an AC DC power adapter (not included). The set includes a protective cover Weight: 170g Dimensions: 175mm x 26mm x 26mm Wavelength: 650nm Output power: 20mW The length of the tested section up to: 17 km Connector: FC, ST, SC Power supply: 2x AA battery or AC DC power adapter (not included). Working time on battery pack: 40H (1mW) Working temperature: 0 60 ?

NFO Metal distribution box 48x SC Simplex LC Duplex – Dimensions: 380x345x60 mm Weight: 4,5 kg Protection level: IP65 Accessories included: Two trays of splices 12 24, Splice covers: 24, Protective tube, Insulating tape, Plastic clamps, Metal clamps (U-bolts): 2, Pole mounting bracket, Metal clamps for the bracket: 2 Powder coated (electrostatic spray) gray, it will ensure resistance to corrosion as well as low and high temperatures in the case of outdoor installations.

NFO Mounting to the mounting tray, screwed to the cable reserve frame for NFO-SCL-61038 NFO-SCL-61039 – for trays screwed to the cable reserve frame The mounting is screwed directly to the sleeve using four M8 screws. The mounting has special holes for installing a tray that can be screwed to the cable reserve frames Material: Aluminum Dimensions: 240x160x2 mm

NFO Optical power meter – The APM65T meter is a device designed for quick and easy testing of optical power in PON networks. Calibration for wavelengths 850nm, 1300nm, 1310nm, 1490nm, 1550nm, 1625nm allows work with single-mode and multi-mode fibers. The meter’s measurement range is -70 to 6 dBm , measurement accuracy is 0.15dB, and resolution is 0.01dB PON network testing Connector: SC or FC Power supply: AA*2 batteries Battery life: up to 160h Dimensions: 107x50x28 mm Weight: 70 Operating temperature: -10 C – 50 C Integrated LED night light