PoE i mrežni adapteri
Prikazujemo 16–30 od 58 rezultata
-
PoE i mrežni adapteri
MikroTik Gigabit Passive Ethernet Repeater
MikroTik GPER, Gigabit Passive Ethernet Repeater. The GPeR unit allows to extend Ethernet cable by additional hop ( 100 – 150 m to regular network devices, and up to 210 m to another GPeR unit) up to 1,500 m. Maximium allowed length of CAT6 Ethernet cable between GPeR and power source router is up to 100 m. Maximium allowed distance of CAT6 Ethernet cable between two GPeR devices is up to 210 m (depending on cable quality). PoE in 802.3af at. PoE input voltage 24-57 B. poE out 802.3af at. Voltage drop on the cable and on GPeR units needs to be taken into account when calculating PoE-in possibility,
Šifra: MIK-GPER -
PoE i mrežni adapteri
MikroTik High Power 24V 2.5A power supply
MikroTik 24HPOW, High power 24V 2.5A (60W) output power supply power plug. Input voltage 240V 1.6A. Power supply with 2.1mm DC plug. Uses standard IEC C13 to German Schuko power cord (included). Recomended for long cable runs.
Šifra: MIK-24HPOW -
PoE i mrežni adapteri
MikroTik Hot Swap -48V DC telecom power supply for CCR1072
MikroTik PW48V-12V150W, Hot Swap -48V DC telecom power supply available to purchase separately for use with CCR1072. Simply remove one of the current power supplies and replace with the new PW48V-12V150W for -48V installations – simple and easy. You don’t event need to turn off the device.
Šifra: MIK-PW48V-12V150W -
PoE i mrežni adapteri
MikroTik IP68 outdoor enclosure for the GPeR
MikroTik GPeR-IP67-Case, IP68 outdoor enclosure for the GPeR. It can be easily mounted on walls and poles. the enclosure has an IP68 rating with protection from immersion in water, as well as protection from dust.
Šifra: MIK-GPER-IP67-CASE -
-
PoE i mrežni adapteri
MikroTik PoE injektor
MIK-RB-POE, Mikrotik PoE injektor, Ethernet Speed: 10 100 Mbps, Low-cost passive PoE base unit for powering passive PoE devices over ethernet. Simply connect your power source to the injector, and then use an ethernet cable to connect the injector to the RouterBOARD device. Helps reducing number of wires that lead up the tower, and in other situations. For using with RouterBOARDS that support 10-28V PoE powering, input needs to be at least 18V to accomodate any losses in cables.
Šifra: MIK-RB-POE -
PoE i mrežni adapteri
MikroTik RBGPOE Gigabit PoE injek. LED
Mikrotik RB-GPOE, Gigabit PoE injek. LED, The new MikroTik Gigabit PoE adapter for powering any RouterBOARD over Gigabit Ethernet. Simply connect your power source and then use an ethernet cable to connect the injector to the RouterBOARD device. Helps reducing number of wires that lead up the tower. For using with any RouterBOARD that supports 18-57V PoE.
Šifra: MIK-RB-GPOE -
PoE i mrežni adapteri
Planet 12-Port Gigabit 802.3at Power over Ethernet Managed Injector Hub (220W)
Planet POE-1200G, 12-Port Gigabit IEEE 802.3at PoE Web Management injector Hub and complies with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab and IEEE 802.3af standards and IEEE 802.3at . With 12 10 100 1000Base-T Gigabit Ethernet ports, the POE-1200G supports full 48V DC power for any remote IEEE 802.3at powered device (PD) such as Wireless LAN Access Point, IP phone, and IP Camera. Supporting full PoE power budget of 220 Watts, the POE-1200G provides sufficient 36 Watts PoE power to 12 remote PD devices. Dimension 440 x 200 x 44 mm (1U height). Web management interface in which administrators can control the functions including port Enable Disable, port priority, system configuration, and Username Password changing and smart features for powered devices. The PoE injector Hub can automatically detect the power status of each port and show massages on its Web management interface. includes PoE Power Saving Schedule
Šifra: PLT-POE-1200G
