MikroTik 48V 2A 96W power supply
Mikrotik 48V2A96W, 48V 2A 96W power supply, to be used with our products that support 48 V POE output, like hEX PoE and CRS112-8P-4S-IN. Its providing 30% more current than the old model 48POW (48 V 1.46 A 70 W), allowing more power per port.
47,00€
Na temelju 0 recenzija
Budite prvi koji će napisati recenziju proizvoda “MikroTik 48V 2A 96W power supply”
Povezani proizvodi
-
-
PoE i mrežni adapteri
MikroTik Gigabit Passive Ethernet Repeater
MikroTik GPER, Gigabit Passive Ethernet Repeater. The GPeR unit allows to extend Ethernet cable by additional hop ( 100 – 150 m to regular network devices, and up to 210 m to another GPeR unit) up to 1,500 m. Maximium allowed length of CAT6 Ethernet cable between GPeR and power source router is up to 100 m. Maximium allowed distance of CAT6 Ethernet cable between two GPeR devices is up to 210 m (depending on cable quality). PoE in 802.3af at. PoE input voltage 24-57 B. poE out 802.3af at. Voltage drop on the cable and on GPeR units needs to be taken into account when calculating PoE-in possibility,
Šifra: MIK-GPER -
PoE i mrežni adapteri
MikroTik High Power 24V 2.5A power supply
MikroTik 24HPOW, High power 24V 2.5A (60W) output power supply power plug. Input voltage 240V 1.6A. Power supply with 2.1mm DC plug. Uses standard IEC C13 to German Schuko power cord (included). Recomended for long cable runs.
Šifra: MIK-24HPOW -
PoE i mrežni adapteri
Planet Gigabit High Power over Ethernet Splitter
Planet POE-162S, IEEE 802.3at Gigabit High Power over Ethernet Splitter that can split the 52 56V DC over the Ethernet cable into selectable 12V or 24V DC power output. Supports a maximum of 25.5 watts of input power. Input Power 802.3at PoE (52 56V DC), Output Power 12V 24V DC Selectable through DIP Switch, Passive 10 100 1000Mbps Duplex Mode Support
Šifra: PLT-POE-162S
Još nema recenzija.