MikroTik (Metal 2) Groove Outdoor Metal 2,4GHz CPE
Mikrotik RBMetal-2SHPn (Metal 2), Industrial Design Metal Completely Waterproof High Powered Outdoor 2,4GHz 802.11b g n Wireless Radio with 6dBI Omni Antenna. Dual Linear Polarization (V-pol, H-pol) Beamwidth H-Plane, typ. 360 , E-Plane, typ. 9 Max TX Power 32dBm 1600mW, Atheros AR7241 400MHz CPU, 64MB DDR SDRAM, (1)100Mbit s RJ45 port, Power required Passive 8-30V PoE only. RouterOS Level4 Software, Max Power consumption 11,5W, Includes Metal-2SHpn, mounting loops, PoE injector, 24V 0.8A powered adapter, 6dBi omni antenna, Angled N connector. Can be used as an AP, to make wireless point-to-point links or as a CPE.
MikroTik LHG XL 5 AC (RBLHGG-5acD-XL), Long Range 5GHz 802.11ac wireless device with an integrated dual polarization 27 dBi grid antenna. It is perfect for point to point links or for use as a CPE at longer distances and supports Nv2 TDMA protocol. The device includes one 10 100 1000 Mbit Ethernet port. ARM 32bit IPQ-4018 4 core 716 MHz CPU. Dimension O 550 x 245 mm. RouterOS LVL 3. Includes 24V 0.38A power adapter, Gigabit PoE injector, two metal rings to mount on a pole.
MikroTik (RBLHGG-60AD-KITR2) Pair of preconfigured…
MikroTik Wireless Wire Dish (RBLHGG-60AD-KITR2) Pair of preconfigured LHGG-60ad devices for 60Ghz link (60GHz antenna, 802.11ad wireless, four core 716MHz CPU, 256MB RAM, 1x Gigabit LAN, RouterOS L3, POE, PSU) for 1Gbps full duplex on distances of up to 2km
MikroTik (SXTR R11e-LTE) SXT Device with built in…
MikroTik SXT LTE Kit, (SXTR R11e-LTE), based on popular SXT device, but does not include a 802.11 wireless device. Instead, it has a built in high quality 2G 3G 4G LTE Category 4 modem for speeds of up to 150Mbit s downlink and 50 Mbit s uplink and two Micro SIM slots for backup link. A perfect device for remote locations that are within cellular network coverage. Due to its professional LTE chip and high gain antenna, it can provide connectivity for your building even where cell phones cant. The signal LEDs show LTE signal level for easy positioning. The SXT LTE supports the popular LTE bands 1,2,3,7,8,20,38,40, 9dBi 60 degree antenna beam width, 650Mhz CPU, 64MB RAM, 2x 10 100 ethernet ports, outdoor enclosure, POE in on Ether1, PoE out on ether2 (RouterOS L3).
MikroTik 2.4GHz dual chain 10dBi CPE
MikroTik SXTsq Lite2 (RBSXTsq2nD), 2,4Ghz dual chain 10dBi compact and lightweight outdoor wireless device with an integrated antenna. Perfect for point-to-point links or as a CPE unit. It is compact, weatherproof and easy to mount. The SXTsq Lite2 retains a 10 dBi antenna like the SXT Lite2, our previous model, yet the antenna design has been improved and the physical size has been dramatically reduced – the SXTsq is two times thinner.
MikroTik LHG HP5 ((High Power 630mW) 5GHz Wireless…
MikroTik RBLHG-5HPnD (LHG HP5), Light Head Grid (LHG HP5) is a compact and light wireless device with an integrated 24.5dBi 5Ghz 802.11a n Dual Chain antenna, LHG HP5 comes with two times more output power than our regular LHG 5 – up to 630 mW TX power, and is designed to reach up to 60% longer distances. Equipped with 600Mhz CPU, 64MB RAM, 1x 10 100Mbps Ethernet port and RouterOS L3 license, perfect for CPE or Point-to-Point links. Supports 5150MHz-5875MHz range. Dish Dimension 391 x222mm, 560 g. Includes 24V, 0,38A Power adapter, PoE injector, 2x metal rings
MikroTik low cost high gain 5 GHz AC CPE
MikroTik Disc Lite 5 ac (RBDiscG-5acD), equipped with a 21 dBi dual chain antenna, 802.11a n ac integrated wireless, 716 MHz CPU, 256 MB RAM, 1x Gigabit Ethernet port and RouterOS Level 3 license. It comes complete with a power supply, Gigabit PoE injector and a mounting ring. Can be used as a CPE or 5Ghz Point-to Point
MikroTik small waterproof wireless access point…
MikroTik LtAP mini LTE (RB912R-2nD-LTm R11e-LTE), small waterproof wireless access point with a built in cellular modem that supports 2G (international version only), 3G and 4G (LTE) connectivity. Connect to the LtAP mini’s built-in 802.11b g n wireless and access the LTE network from your phone or any other wireless device. The LtAP mini also has one 10 100 Ethernet LAN port for your wired devices. The RS232 serial port gives you console access for debugging. LtAP mini has a special enclosure with a wall mounting kit, two SIM slots to alternate between cellular providers, and integrated GPS support, External GPS antenna is available for ordering separately (not included, product code ACGPSA).