MikroTik RB911G-5HPacD-NB, (NetBox5) 5GHz 802.11ac, dual chain Outdoor AP CPE Point-to-Point device with 2x RP-SMA connectors for antennas, Connector type RP-SMA Female (outside thread), and a cable hood for protection against moisture. Max TX Power 30dBm, Qualcomm QCA9557 720MHz CPU, 128MB DDR onboard memory, One 1000Mbps Gigabit RJ45 port, This device supports the new 802.11ac standard for increased wireless speed (866Mbit datarate, and 20 40 80MHz channels). The case can be opened with one hand, and is protected against the elements. USB, Ethernet and a Grounding wire exits are provided on the bottom, behind a protective door. Router OS Level4 Software, Power Required: PoE in: 8-30V DC on Ether1 (Non 802.3af). Includes Netbox outdoor unit, PoE injector, mounting loop for tower pole mounting, DIN rail mount, 24V 0.8A power adapter
MikroTik RB922UAGS-5HPacD-NM NetMetal 5 High power 31dBm Dual Chain 802.11ac product in a waterproof metal enclosure with two RP-SMA connectors for external antennas. Powerful 720Mhz CPU 128MB RAM One Gigabit Ethernet port 802.11a n ac wireless One 1.25G SFP cage (SFP module sold seperate) USB 2.0 port 2x RP-SMA connectors for external antennas RouterOS Level 4 license RB922UAGS-5HPacD-NM version is equipped with miniPCI-express slot and SIM slot for 3G 4G device or additional wireless card 256-QAM modulation 20 40 80MHz channels.
MikroTik S-3553LC20D, a pair of SFP transceivers, the S-35LC20D is a 1.25G Single Mode optical SFP module with a LC connector, T1310nm R1550nm, which works for connections up to 20km and supports DDM. The S-53LC20D is a 1.25G Single Mode optical SFP transeiver with an LC connector,T1550nm R1310nm, which works for connections up to 20km and supports DDM.
MIK-RB-POE, Mikrotik PoE injektor, Ethernet Speed: 10 100 Mbps, Low-cost passive PoE base unit for powering passive PoE devices over ethernet. Simply connect your power source to the injector, and then use an ethernet cable to connect the injector to the RouterBOARD device. Helps reducing number of wires that lead up the tower, and in other situations. For using with RouterBOARDS that support 10-28V PoE powering, input needs to be at least 18V to accomodate any losses in cables.
MikroTik PWR-LINE EU (PL7400), is designed for MikroTik products with microUSB port, like hAP mini or hAP lite. Connect PL7400 to your electrical outlet and then connect the USB cable to power your supported MikroTik device. When doing the same with another PWR-LINE compatible device somewhere further in your premises, the devices will form a 100Mbit (max) connection without needing to install any LAN cables. Comes with Type C power plug. Dimension 50 x 68 x 33 mm
MikroTik RB911G-5HPnD-QRT (QRT 5), High power integrated antenna, rugged outdoor flat panel antenna, with a built in RouterBOARD. The device has a 23dBi antenna and a high power 5GHz wireless transmitter. Inside is the high power RB911 dual chain wireless device with high performance, high output power wireless transmitter. It has a Gigabit Ethernet port, to fully utilise the benefit of 802.11n high speed wireless. QRT is ideal for point to point links
MikroTik QMP (quickMOUNT pro), advanced wall mount adapter for small point to point and sector antennas. You can mount it on the wall or use it as an adapter from large diameter pole to small size antenna mounting clip ensuring reliable fitment. The quickMOUNT pro gives possibility to turn antenna within 140 both in horizontal and vertical plane. With the quickMOUNT pro it is possible to perfectly set antenna alignment using integrated graduated scale. You can use the quickMOUNT pro with any pole mountable device or Mikrotiks small mounting clip with weight less than 1.5 kg. Supports SXT, Omnitik, BaseBox or any other pole mountable device.
MikroTik QMP-LHG, advanced wall or pole mount adapter for our new LHG antennas. The quickMOUNT pro gives possibility to turn antenna within 140 both in horizontal and vertical plane. With the quickMOUNT pro it is possible to perfectly set antenna alignment using integrated graduated scale. Wall or pole mountable. Dimension 95x88x112mm.
MikroTik MTRADC, Radom for parabolic Dish antennas MTAD-5G-30D3(PA), mANT 30dBi parabolic antennas, It reduces wind load, protects reflector surfaces from harsh environment, protects the antenna feed from falling objects, as well as positively affects the antenna sustainability and operational life. It’s made from a special material that has a low dielectric constant. Wide range of temperature and direct sunlight won’t affect it.
MikroTik WMK-4011 – The RB4011 wall mount kit is made for protecting your device and its ethernet ports from unauthorised access Made from durable steel, the mount attaches to a wall and allows the ethernet cables to be plugged in, before the router is mounted inside Once the device is secured, there is no easy way to unplug cables, or move the device
MikroTik mANTBox 2 12s (RB911G-2HPnD-12S), long range 12dbi 120 degrees integrated Base Station for 2.4 GHz. Comes with the Gigabit Ethernet port and has a built in 802.11 b g n Dual-chain wireless RB911 device with up to 30 dBm output power. Unit comes with Gigabit PoE injector, 24V 0.8A power adapter, quickMOUNT PRO mount metal ring for pole mount, Router OS lvl 4. Polarization Vertical and horizontal. Dimension 140x348x82mm.
Mikrotik RB921UAGS-5SHPacD-NM NetMetal 5 Super High power 2000mW (33dBm) Dual Chain 802.11ac product in a waterproof metal enclosure. powerful 720Mhz CPU 128MB RAM One Gigabit Ethernet port 802.11a n ac wireless One 1.25G SFP cage (SFP Module sold seperate) USB 2.0 Port 2x RP-SMA connectors for external antennas RouterOS L4 license 256-QAM modulation 20 40 80MHz channels.
Korištenjem stranice makromedia.hr pristajete na uporabu kolačića. Blokiranjem kolačića i dalje možete pregledavati stranicu, no neke njezine funkcionalnosti Vam neće biti dostupne. RazumijemViše informacija